Mako

Mako
Mako Mako Mako Mako
houzz interior design ideas Follow Me on Pinterest
 
Brand: Eleganza Tiles
Product Code: Mako-Series
Reward Points:
Availability: In Stock
Listed Price: $6.00

Available Tile Size and Color Options


* Size:

* Collection Colors:

Square Foot Calculator

Enter Square Footage Needed:
Actual square feet: 15.5 SF
Price Per Carton: $93.00
Total Price before shipping and tax: $93.00

 Add to Cart   View Accessories
   - OR -   

Mako porcelain faithfully reproduces the texture of the most precious textiles. Its distinctive surface invites you to caress it as it captures your attention with its reflective stitching. Mako has been developed utilizing a new technology utilizing a mixture of colored and serigraphed sequences with variations in thickness, consistency, opaqueness as well as shine which perfectly overlap in a regular pattern.

Mako is perfect for refinishing both interior and exterior as well as residential and commercial applications such as restaurants, hotels, halls, etc. Mako is manufactured with 40% pre-consumer recycled materials (2 LEED points). Mako is a suitable choice for both floor and wall applications.

Product Details
SKU Mako Series
 P.E.I. 4
 C.O.F. (Wet) >0.60
 C.O.F. (Dry) >0.60
 MOHS 7
 Absorption <0.5%
 Chemical Resistance Yes
 Frost Resistance Yes
 Application Floor
 Build Type Commercial, Residential
 Recycled Content(%) 40
Look
 Finish Matte
 Glaze Type Color Body
 Look Fabric
 Color Variation 2
 Edge Finish Rectified
 Type Color Body Glazed Porcelain
Measurement
 Size 12x24
 Area Indoor, Outdoor

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Maintenance:

Porcelain tiles require a minimum of maintenance. Sweep thoroughly and mop with a clean damp mop. If necessary a mild household detergent can be used. Do not use abrasive cleaners or brushes with hard bristles. Clean up spills immediately, use detergent in strengths recommended by their manufacturer, allow the detergent to remain on the surface of the tile as recommended and rinse thoroughly with clean water to remove the detergent and the emulsified residue. Choose a product compatible for cleaning the tile and grout at the same time. It is strongly recommended that a small test area be used prior to usage of installation, tile, cleaning and maintenance products to determine if the product selected will serve its intended purpose.

Suggested Cleaners for Porcelain Tile:

Most household cleaners are sufficient to clean common stains so long as the problem is addressed immediately. Where stain removal becomes a problem, contact a cleaning and maintenance product supplier or shop directly here on Texas Best Flooring Company’s main website for all the tile flooring cleaning products you need.

If any trim or molding is made for this specific collection it will be listed for you to order above under accessories. We also have generic tile trim and moldings at this link

Tile flooring products do not require glues or adhesives. They require mortar, setting bed, primers, etc. Please click on the following link to order tile installation materials.

Tile may require a cement backer board sub straight before it is laid or a crack isolation membrane system. For these and other tile underlayment / substrate systems click here: Tile & Stone Underlayment

 


Eleganza sells first choice Ceramic and Porcelain tiles only. All of our tiles are manufactured according to ISO Standards, and meet or exceed these requirements. If our tile is proven to have a manufacturing defect, we will replace the tile, free of charge. And, if we don’t have the same material, we will replace them with the comparable material as determined by us. Labor charges are excluded from this warranty.

Buyer understands that all tiles are subject to variations in technical specifications, including coefficient of friction due to the inherent variables in the raw materials and production process. Buyer must determine slip resistance suitability for any material use. Eleganza makes no warranty as to the suitability of its tile for a particular installation. Eleganza does not warrant that its tiles will not scratch, chip or show signs of wear. 

Eleganza and its Dealer & Distributor must be notified of any claims or defects immediately, but in any case, not later than 60 days after the goods have been delivered by Eleganza. This notification must be in writing or sent by certified mail. Claims concerning shade, appearance, caliber, finish or obvious defects in first choice production must be communicated before the tile is installed. No claims will be accepted for tile already installed or for defects in other than first choice material.

This limited warranty shall constitute the full extent of Eleganza’a liability and is in place of all other warranties, express or implied, including the implied warranty of merchantability and the implied warranty of fitness for a particular purpose.

 

Recommended Tile Installation: Job site conditions and substrate preparation.

 

Job Site Conditions:

 

The environment where tile is installed is critically important to successful installation and continued performance. The area should be free of all construction debris, dirt and surface contaminants. Unobstructed access to the job site should be provided and provisions must be made for handling the product from storage to the installation area. Prior to installation, permanent lighting or temporary lighting representative of permanent lighting, must be provided. Always consider the potential adverse effects of extreme temperatures and humidity on mortar and grout with exterior installations of Porcelain tile. Adequate ventilation, heating and/or air conditioning should be available to sustain an environment required for the installation of bonding and grouting materials. The type and methods of construction, grade level and flooring system components all impact the final installation. Some minimal code requirements for flatness, levelness and deflection may not provide a suitable system for the installation of Porcelain tile. When installing any flooring product make sure you do a moisture test of the subfloor. Also, when installing flooring tile in Dallas Texas, Houston Texas or other areas in the Midwest that have a high concentration of expansive clay soil under homes make sure you use a crack isolation membrane system and go with a ceramic porcelain tile not a basic ceramic tile as basic ceramic tile will crack more easily.

 

Primary flooring substrates for tile installation:

 

Concrete and Masonry: When tile is directly bonded to an existing concrete or masonry substrate, the tile installation is greatly affected by the suitability and condition of the concrete or masonry supporting the installation and providing the bonding surface. Flatness of the substrate must be checked to meet industry methods and specifications. The Tile Council of North America (TCNA) Handbook for Ceramic Tile Installation requires that tile substrates have no more than ¼” variation in 10 feet and no more than 1/16” variation in 1 foot from the required plane. If substrates do not meet the flatness requirements and remedial corrections are not made, the installation will likely have lippage or flatness issues, a leading cause of complaints. When correcting concrete or masonry substrates use only products specifically designated for this purpose. Bonding materials like cement mortars (thin-sets) are not designed for patching or other thick applications. If the tile is 15”x15” or larger, it is strongly suggested that a medium bed thin set mortar be selected, allowing for the spreading of more mortar underneath the tile. Follow closely all manufacturers recommendations and directions. In some instances grinding down high spots on floors will be necessary. Concrete and substrates must be clean and free from dust, paint, or drywall compounds that can act as bond breakers. It is important to check for cracks in concrete substrates. Bonding over cracks can lead to loss of bond or the crack telegraphing through the tile. Crack isolation, self-leveling underlayments and uncoupling membranes are available to address problems of this type. Since there are many different methods of installation over concrete and masonry substrates the TCNA Handbook and the American National Standard (ANSI) Specifications for Ceramic Tile should be followed.

 

Wood Substrates: Unlike a concrete substrate, a wood subfloor only provides the support for tile installation, not the bonding surface. When wood is the substrate, it’s important to be aware that wood expands and contracts when its moisture content changes. Wood substrates deflect, or bend, under loads more than concrete substrates. Tile installations require a rigid substrate that will not deflect, or bend when loads are applied. The greatest deflection will occur in the wood panels fastened to joists at the midway point between the joists particularly under point or concentrated loads. Too much deflection causes cracked and/or powdered grout joints, cracked and debonded tiles. Subfloor panel thickness and joist spacing determine subfloor panel deflection. Smaller joist spacing and thicker subfloor panes allow less deflection. Most floor installation methods in the TCNA Handbook limit joist spacing to 16” on center. However, there are methods in the Handbook that allows for a wider joist spacing, (19.2” on center and 24” on center) if certain requirements to prepare the substrate are met. All methods require the subfloor to be at least 19/32” (5/8”). Many methods require the subfloor to be 23/32” (3/4”). Some methods require a second layer of plywood for greater rigidity to reduce deflection. Since there are many different methods of installation over wood substrates the TCNA Handbook and the ANSI Specifications for Ceramic Tile should be followed. Further subfloor placement and fastening requirements can be obtained from the American Plywood Association (APA). Follow all applicable industry methods and specifications and individual manufacturers’ recommendations and directions. Backerboards and some types of plywood panels are suitable underlayments to install over a wood subfloor to receive ceramic tile. There are several types, each having different application suitability and some unique installation requirements for different applications. Because of their significant differences the TCNA Handbook contains separate installation methods and standards for the various board types. To ascertain proper use and installation methods review the TCNA Handbook and the specific board manufacturer’s instructions.

 

Membranes:  Membranes are flexible sheets that are bonded to concrete, wood and poured underlayments. They have a broad range of uses and come in many forms. Some are pre- manufactured sheet goods that are simply bonded to the substrate. Others are applied as a wet material that becomes the bonded membrane once it has dried in place. Some mortars used as the tile adhesive now possess the flexibility and meet the performance requirements of a crack isolation membrane. Crack isolation membranes, full and partial coverage, and uncoupling membranes are unique products. The proper methods and specifications for their use can be found in the TCA Handbook and the ANSI Specifications for Ceramic tile. Manufacturer recommendations and directions must be carefully followed.

 

Tile Storage and Handling:

 

Porcelain tile does not require special consideration regarding temperature or humidity and in certain climates it can be stored outdoors. Prior to beginning installation, check the materials to ensure that you have the correct pattern, style and color. Check your quantities to make sure you have the required amounts to complete your job. Inspect the tiles before installation for any visible defects. If defects are visible in the product, stop the installation and contact the entity you purchased your tile from immediately.

 

Tile Flooring Layout: 

 

Layout is critical to an aesthetically pleasing tile installation. Tile layouts should be centered and balanced as much as possible with respect to the tiled area and any specific focal points. Usually, a space offers more than one acceptable layout, making the final selection a matter of personal preference. The ANSI Specification for Ceramic Tile says: “an excessive amount of cuts shall not be made. Usually, no cuts smaller than half size should be made. Make all cuts on the outer edges of the field.” When multi-room layouts necessitate cuts smaller than ½ tile the bestpossible layout will place smaller cuts in the least obvious places. Movement joint requirements must be considered also. See the TCNA Handbook for Ceramic Tile Installation section EJ-171 for complete recommendations.

 

Tile Patterns:

 

The pattern that you select can significantly enhance the aesthetic and visual appearance of your tile. Just by changing the pattern you can change the whole look your tile. See Texas Best Flooring Company’s Blog for down loadable PFD’s of tile installation patterns.

 

Tile Bonding/ Setting Materials:

 

Innovative technology has produced a plethora of bonding materials for the installation of tile products. Careful consideration must be given to the type of substrate and type of tile selected in choosing the proper bonding material. Common tile setter terms such as “thin-set” and “mastic” are not specifically defined meanings. The term “thin-set” is used interchangeably to describe a cement-based mortar and a method that encompasses all bonding materials that facilitates thin-bed installations. Therefore mastics (organic adhesives) and epoxies could be called “thin-set” Industry standardized terms for cement mortars are “dry-set mortar” or “latex/polymer modified mortar” instead of “thin-set”. Dry-set Portland cement mortar does not contain polymer and is often referred to as “unmodified mortar”. Cement based mortars that contain polymers additives are called “latex/polymer modified Portland cement mortar” or “modified mortar”. Both perform dramatically better than organic adhesive (mastic) and are generally preferred for most jobs. Modified and unmodified mortars are sometimes interchangeable; however, many applications require the specific use of one or the other. All bonding materials have minimum and maximum thicknesses that should not be ignored. Too little reduces bond strength and too much provides inadequate compressive strength and may shrink causing lippage and cracked tiles. Minimum bond coat thickness after proper bedding is 3/32” for cement mortars and 1/32” for organic adhesives. While cement mortars thickness varies by product generally about ¼” is standard. For thicker applications, use a medium-bed mortar which will maintain compressive strength and minimize the potential for shrinkage. Organic adhesives (mastic) are ready to use products sometimes referred to as mastic or glue. They are categorized as Type I or Type II based on suitability for use in wet areas. Organic adhesives and cement-based mortars differ in composition and application suitability. Organic adhesives have considerably more limitations and should not be used interchangeably with cement mortars. Organic adhesive is not the best choice for bonding floor tile, even in dry areas its low compressive strength, as compared to cement mortar, will not withstand impact or loading. Epoxy bonding materials are available and should be used with the express manufacturer’s recommendations and directions. Adhesives: 4-1/4 wall tile and ceramic mosaics on dry wall – V-notch 3/16” X 5/32”. 6” X 6” to 9” X 9” on dry wall – Square notch ¼” X ¼” X ¼”

 

Dry-Set Mortars:

 

4-1/4 wall tile and ceramic mosaics on masonry and concrete: U-notch ¼” X ¼” X 5/16”, 6” X 6” to 9” X 9” on masonry walls and concrete: U-notch ¼” X ¼” X 3/8”

 

Medium Bed Mortars:

 

12” X 12” and larger size tiles on masonry or concrete & tiles with thickness variation: 3/8” X ¾” X 9/16” - 25/64” X ¾” X 19/32”

 

Always check trowel for excessive wear before use. Use the flat side of the trowel to key mortar or adhesive into substrate to achieve the best possible mechanical bond. Comb in one direction with the notched side of the trowel, holding at a 45 degree angle. Specifications require no less than 3/32 inch (2mm) mortar and 1/32 inch (1mm) adhesive between tile and substrate after proper bedding. Set tile with a sliding motion perpendicular to the mortar ridges. The 80 – 95 % coverage shall be sufficiently distributed to give full support to the tile with particular attention to support under all corners and edges of the tile. Periodically remove sheets or individual tiles to assure proper bond coverage consistent with industry specifications.

 

Grout for tile:

 

Grouting: A bad grout job can ruin a perfect installation. In addition to the aesthetic value of a quality grout job, it can affect the longevity and maintenance requirement of the tiled area. Properly mixed and applied polymer modified cementitious grouts withstand the heavy service and maintenance conditions of commercial areas. Poorly-installed grout can show signs of wear under lighter conditions of a residential bathroom. Grout joint width and type of tile determine the grout product selection. A Grout Guide is provided in the TNCA Handbook covering suggested joint widths and tile type and use for the following grouts: Jobsite Mix (Sanded), Standard Unsanded Cement Grout, Standard Sanded Cement Grout, Polymer Modified Unsanded Tile Grout, Polymer Sanded Tile Grout, Modified Epoxy Emulsion, 100% Solid Epoxy, Furan, Silicone Urethane and Mastic Grout. Grout manufacturers provide printed instructions for proper mixing, cleaning and curing of each type of grout. These instructions must be carefully followed. A variety of sealers are available to enhance and protect certain types of grouts. Careful attention must be given to selection, application and clean-up of all sealers. Follow manufacturers’ instructions explicitly. Top finishes and waxes affect the appearance of the tile and therefore are not recommended.

 

Tile Setting Tools:

 

Texas Best Flooring Company has many tile setting tools you will need for all your tile installation products for sale on our main website.

 

The single most important tool is the notched trowel. They come in a variety of sizes and notch configuration and the proper selection is vital to the performance of the finished installation. There are square notches and rounded notches in a variety of widths and depths. The tile industry is one of a few industries that use notched trowels. They are designed specifically to apply a gauged amount of bonding material to the substrate. The National Tile Contractors Association, Inc. (NTCA) recommends the following Trowel Guidelines:

 

Tile Job Site Clean Up:

 

A final rinse of the grouted area should leave the surface clean and free of grout haze. Most grout haze can be removed from Porcelain tile with warm water and a mild detergent using a nylon pad or soft bristle brush. Acid cleaning is rarely recommended and should be done only by qualified personnel. When necessary, a solution of Sulfuric Acid is recommended with strict adherence to the manufacturers’ instructions. All acid or acid based cleaners can adversely affect most grouts. Thorough rinsing to neutralize the acid is mandatory. Restrict traffic and use of freshly – grouted areas for at least 12 to 24 hours in residential applications and up to 72 hours in commercial installations. Exposure to water and freezing temperatures must be avoided. Temperature and humidity affect the curing time of all cementitious materials. Allow for extended cure times for temperatures below 60 degrees F and/or when relative humidity is above 70%. Check individual data sheets and closely follow manufacturer’s recommendations and directions.

Tags: tile installer, tile contractors, f, tile installation, tile prices, cheap tile, flooring company, tile store, tile samples, tile flooring estimates, full body porcelain tiles, Axis Collection, polished porcelain tile, best flooring tile, Emser Tile, Contemporary Series, discount tile, Tiles Options, eleganza tile, Dal-Tile, stone flooring,

View Accent Pieces and Accessories

Accessories:
   
Coverage:
Price:
Unit:
Quantity:
Subtotal:
ACCESSORIES - Eleganza Tiles Mako Java Scuro 1x1 Mosaic On 12x12

$17.00 /

min.
$0.00
ACCESSORIES - Eleganza Tiles Mako Java Scuro 4x24 Bullnose

$14.00 /

min.
$0.00